Day 1 of the build from the contractors from BudgetHomeKits

Phase 2 was getting the house square and drilling the holes for the posts. We had to provide 35 bags of cement for this process. That is not included in the purchase or the uplift or the kit. It needed to be onsite when they arrived. They needed to find a rental for the hole digger. The first hole took a long time as they hit a piece of metal that was in the ground. I guess there was an area that they used to dump things before we bought the property. 

They did the assembly of the corner column anchors and then dug the 14 inch wide and 30 inch deep holes for each anchor - I am glad I did not have to perform this step. After setting the corner anchors they did the wall anchors and both the front and rear porch anchors for the posts.





The wood to get us 1/2 way through winter with the wood burning stove in the log cabin.





. They finally got it drilled and the posts set. 


Comments

Post a Comment

Popular posts from this blog

It is finally here!

Image
 Our house kit was delivered on 14 December 2020. We really needed to have a forklift to help offload. Once again my neighbor had the forklift attachment for the skidsteer. They offloaded from down by the creek and used the forklift to move it up to the pad area. They laid everything out where we could access it as needed after they were done. They said they would need 4 days to get the posts set, the foundation forms installed, and the roof trusses and porches put in.  As part of the uplift we purchased they did the last step of Phase 1 which is getting the orientation done. We had set the orientation for the house, but they said there would be an issue with the porches on the edge of the pad. They remeasured and set the orientation correctly and set the batter boards which is the start of Phase 2 - Setting Column Anchors. Once again they were very professional and took care of everything and answered all our questions we had about the build process after they would leave. Th...
Read more

Putting the roof on the porches

Image
While the contractors were here we discussed the different phases of the build. They said you move some things around such as the roof. We skipped ahead to Phase 8 putting on the porch roof panels. I put the panels next to the porches to help speed up the process. My brother and sister showed up to help and then my neighbor with the skidsteer (which we needed for additional height to reach the front porch due to the slope of the property). The instructions were very detailed starting on page 69 of my book. Careful attention needs to be done to ensure you get the first panel square and ensuring your extended rib faces inward. The first rib needs to be 1 inch off the end of the truss. After this it was an easy process to continue on each panel until we were done. Since we didn't do stage 7 yet, we could not finish the installation of the corner trim.  This stage did not even require 1/2 day to perform. 
Read more

Background on our journey

Image
I wanted to provide this blog to others that may buy a home from budgethomekits.com. There were many mistakes that I made, some improvements to how they did a few things and a lot of things that they do not even cover in the instructions. In no way is this a complaint to the company as they were very helpful and for the most part the instructions were spot on. So here is my story.   In July 2020 I decided to semi-retire from my job in Kansas and buy some property and move to either Arkansas or Missouri. I was originally planning to build a log cabin kit but stumbled onto the BudgetHomeKits website and liked the selection and pricing of what they had to offer. My wife and I settled on the Magnolia kit and put the deposit on the kit that was in clearance at a greatly reduced price - boy was that a good move as the price of metal started going up and up and our price was locked in.  In late August we found 50 acres in Southeastern Missouri about 120 miles south of St Louis. ...
Read more