Putting on the roof

The next step for us was putting on the roof over the house. My brother in law is a roofer and brought out his roofing crew to help us on this step. 

The first step was finishing the last part of Phase 8 putting on the porch flashing which was very easy to complete and only took a short time. 

They thing did most of the installation of Phase 9 putting on the primary roof panel installation. Once again make sure the first panel rib is 1 inch off the end of the truss and is square with the trusses. After the first panel is in place the process is to just keep adding the panels to the other end of the house. The instructions are very detailed and should not be too hard to complete. 

We did perform part of Phase 10 by installing the ridge cap on the roof even though it would have to have the ends screws removed to install the rake trim, but that will have to wait until we put the siding up. At this stage we still had not done plumbing or concrete, but now the house was dried in for the most part to complete those tasks. 








Comments

Popular posts from this blog

It is finally here!

Putting the roof on the porches

Background on our journey